<menu id="qasso"></menu>
  • 單頁簡介

    亞美am8手機app下載

    廠址:江蘇省蘇州市吳中區東吳工業園興吳路67號

    電話:0512-68226118 68204423

    傳真:0512-65134034

    郵箱:uuzb@163.com

    產品詳細

    116

    產品名稱: ZJF彈簧上料機

    發布日期: 2015/9/30 13:57:04

    點擊數: 8 

    二維碼:

    簡述:

    產品詳情

    產品介紹
    Product Introduction 
    本機采用螺旋輸送原理,使用鋼絲彈簧旋轉把塑料粉末從儲料箱輸送到塑料成形機料斗中,直至加滿由料位器發出滿料信號,停止加料,待料位下降到一定位置后,料位器發出信號,繼續加料,如此反復循環,從而實現了加料自動化。
    This machine adopts the principle of screw conveying and uses steel wire spring rotation to convey the plastic powder from material storage tank to the plastic molding machine hopper until filled and material level machine sends out full material signal, and then stop charging. After the material level drops to a certain location, material level machine sends out signal and charging is continued. With such repeatedly cycle, therefore charging automation is achieved. 
    該機主要適用于各種塑料粉末及粒子的上料,與塑料擠出機,注塑機配套使用,具有簡化工作、節省人力、改善勞動條件、操作簡便、文明安全等優點。
    This machine is mainly applicable to the feeding of plastic powder and particles, which hs the advantages of simplifying work, saving manpower, improving labor conditions, simple operation, civilization and safety, etc. using with plastic extruder and injection moulding machine. 
    主要技術參數:

    亞美am8手機app下載 www.jcgrb15.top Main Technical Parameters: 

    注:電源規格,380V,50HZ;

    該加料機適用于粉末粒度≤200目,表觀比重≤1g/cm3;

    特殊規格送料管長度可定制。


    Remark: Power specification: 380V, 50HZ;

           The feeding machine is applicable to powder particle ≤200 mesh, apparent specific gravity ≤1g/cm3;

           Feeding tube length of special specification can be customized. 


    上一個: XAL-700吸引式送料機

    下一個:沒有資料

    版權所有:江蘇蘇州吳中區東吳工業園興吳路67號   技術支持:亞美am8手機app下載 

    配资一般配多少
    <menu id="qasso"></menu>